Automatic Transformer Ratio and Vector Group Tester Transformer Ratio Measuring Instrument Transformer Ratio and Vector Group Tester - Yangzhou Darui
Darui Electric recommends for you
Transformer Ratio Tester adopts a 32-bit ARM core as the processing core to control the whole machine. It realizes the one-time completion of the ratio measurement of single-phase or three-phase transformers. The operation of the instrument is all displayed in Chinese menus, which is simple and intuitive. The test results are accurate and reliable, and the test results can be stored and printed. Strong anti-interference ability. It can meet the needs of various large, medium, and small transformer ratio tests.
II. Measures
1. Read this manual carefully before using this instrument.
2. The operator of the instrument should have general knowledge of electrical equipment or instruments.
3. This instrument can be used indoors and outdoors, but should avoid places with rain, corrosive gas, excessive dust, high temperature, direct sunlight, etc.
4. The instrument should avoid severe vibration.
5. Repair, maintenance, and adjustment of the instrument should be carried out by professionals.
6. During the test, it is forbidden to move the test clamps and the power supply lines.
III. Performance Characteristics and Technical Indicators
1. Main technical indicators and usage conditions are shown in the table below
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
