Product Details

SF6 Gas Recovery DevicePurpose Description

SF6 gas, as an insulating gas, is non-toxic, non-flammable, and has excellent insulating properties. Its insulation strength is much higher than traditional insulating gases, and it also has good arc-extinguishing properties, so it is widely used in SF6 electrical equipment. Since SF6 gas is expensive and decomposes under the action of arcs, sparks, and corona discharge to produce toxic components, it is necessary to recover SF6 gas when using SF6 electrical equipment. This device is a special equipment for recovering and refilling SF6 gas during the manufacturing and maintenance of SF6 electrical equipment.

SF6 Gas Recovery DeviceTechnical Features

1.2.1. Built-in filtration and adsorption system can adsorb impurities, moisture, decomposition products, and oil in SF6 gas.

1.2.2. Integrated design and compact size facilitate movement and use.

1.2.3. Efficient maintenance-free filtration system greatly ensures the quality of recovered SF6 gas.

1.2.4. Built-in phase sequence protector eliminates any worry about the main unit reversing due to phase sequence errors at all times.

1.2.5. All electrical systems use high-quality brands.

1.2.6. SF6 Gas Recovery Device, high-quality casters greatly protect the floor paint and reduce the labor required for pushing.

1.2.7. The whole machine is air-cooled, no external water source needed.

1.2.8. Built-in temperature protection system can work normally even at -20 degrees Celsius.

1.2.9. Built-in drying and heating system ensures that after the desiccant is saturated, it can be activated and regenerated by heating the equipment, thus eliminating the need to replace the desiccant.

1.2.10. All ball valves are sealing elements with automatic compensation performance.

1.2.11. SF6 Gas Recovery Device, has built-in solenoid valve power-off protection function, preventing oil return from the vacuum pump due to power failure or motor seizure.

Technical Parameters

2.3.1. Recovery

Initial recovery pressure ≤0.8MPa

Final recovery pressure ≤50KPa

Recovery time: For 1 m3 SF6 gas volume at initial pressure 0.8MPa, recovery to final pressure 50KPa takes less than 2.5 hours.

2.3.2. Filling

For 1 m3 SF6 gas volume at initial pressure 133Pa, filling to 0.8MPa takes less than 0.8 hours.

2.3.3. Vacuum pumping

Ultimate vacuum of the device is less than or equal to 10 Pa

For 1 m3 SF6 gas volume at initial pressure 0.1MPa, vacuum pumping to 133Pa takes less than 1.0 hour.

2.3.4. Storage

Storage container volume 0.05m3

Nominal liquid storage capacity 50kg

Storage pressure 3.8 MPa

2.3.5. Purification

For SF6 gas with moisture content below 1000PPM (volume ratio), after one recovery and purification by this device, moisture is less than 60PPM (weight ratio), and oil content is less than 10PPM (weight ratio)

2.3.6. Annual leakage rate ≤1% of nominal storage capacity

2.3.7. Noise ≤75dB(A) sound pressure level

2.3.8. Working environment temperature -10°- 40℃

2.3.9. Power ≤5KW

2.3.10. Power supply: AC three-phase five-wire system 50HZ 380V±10%

2.3.11. Weight approx. 600 kg

2.3.12. Dimensions (length×width×height): 1450×810×1200