Atmospheric air enters the air storage tank through the air compressor, most of the moisture is compressed and liquefied and discharged through the drain valve, the air undergoes the first drying; then it enters the refrigerated dryer, where water vapor is condensed into water, the air undergoes the second drying; then it enters the adsorption dryer for the third drying, adsorbing the remaining trace moisture, and finally, after passing through a high-precision air filter, it is transported to the equipment requiring dry gas.
Air Dry Generator Performance and Features:
It is mainly composed of four parts: air source system, refrigeration drying system, adsorption drying system, and electrical control system, forming a mobile high-purity dry air generation device.
Air source system composition: It consists of an air dust filter, an oil-free air pump (or screw-type oil-free air compressor), a radiator (air-cooled), an air-water separator, and filters, outputting clean and oil-free gas.
Refrigeration drying system composition: This device mainly adopts an imported fully enclosed high-temperature compression refrigeration unit, with stable and reliable performance, capable of obtaining greater cooling capacity. The system configuration adopts an imported fully enclosed compressor unit, air heat exchanger, evaporator, air-water separator, and fine filter; during the refrigeration process, the R22 refrigerant first passes through the fully enclosed high-temperature compression refrigeration compressor, cooler, desiccant, solenoid valve, and finally returns to the refrigeration compressor through the evaporator, obtaining a low-temperature environment of 0-5°C inside the evaporator.
Electrical control: The main control electrical parts adopt Schneider Electric; the whole machine has stable, safe, and reliable electrical performance.
Main parameters:
1. Output pressure: A output: 0--0.4Mpa (adjustable, generally connected to chromatograph)
B output: 0.46Mpa (non-adjustable, generally connected to the air input of nitrogen generator) 3. Noise ≤42 decibels
2. Maximum power: M210-AP2 150W
M210-AP5 180W
3. Working conditions:
(1), Power supply: AC 220 ±10%; 50Hz
(2), Ambient temperature: 5-40°C
Relative humidity: <85%
No severe dust pollution in the environment
