SF6 Gas Vacuum Pumping Device Price
Product Functions:
1. Vacuum pumping and vacuum measurement for the device itself, SF6 switches, and GIS
2. Vacuum pumping and vacuum measurement for liquefaction tanks
3. Vacuum pumping and vacuum measurement for the device itself
4. Gas filling for SF6 switches
5. Recovery of SF6 gas from electrical equipment, including moisture and oil treatment
6. Drying and purification of recovered and refilled SF6 gas
7. Recovery, liquefaction storage, and residual pressure measurement of SF6 gas in SF6 electrical equipment
8. A storage tank with a capacity of 80 liters is housed within the device body.
9. Compression and liquefaction storage of SF6 gas.
10. The device is mobile.
Precautions:
1. Before use, check that all connections are correct and the interfaces are sealed.
2. The oil level of equipment components should be appropriate.
3. The vacuum pump must not run in reverse.
4. Do not open vacuum gauge V9 when the equipment has gas pressure.
5. Replace the filter element after 5000 hours of operation. Replace the molecular sieve after 10000 hours.
6. The refrigeration system can be started 15-30 minutes in advance when recovering gas.
7. When the refrigeration system is running, a small amount of condensate may be discharged; handle it appropriately.
