Efficient Vacuum Oil Filter Maintenance
Technical Parameters:
Air Supply Capacity: 40M3/h
Working Pressure: 0.6~0.8Mpa
Air Supply Pressure: 0~0.3Mpa
Air Supply Dew Point: ≤-60℃
Filtration Precision: 0.01µm
Working Cycle: 5-30Min adjustable
Adsorption Material: Strong composite molecular adsorbent (exclusive for Hanyi brand)
Regeneration Method: Automatic heatless (no heating required)
Operating Noise: ≤75dB(A)
Interface Pipe Diameter: 20mm
Ambient Temperature: -10～40℃
Working Power Supply: 50Hz 380V three-phase three-wire
Total Power: 6kW
Overall Dimensions: 1350×1200×1600mm
Equipment Weight: 450Kg
Continuous Working Time: ≥200 hours
Mean Time Between Failures: ≥5000 hours
Product Functions:
♦ Air drying generator, removes moisture from the air. The dew point of the treated air can be lower than -80℃ at the extreme.
♦ Removes particulate matter from the air.
♦ Used as an alternative to nitrogen filling drying or hot oil circulation drying during overnight transformer construction.
♦Provides dry air during transformer installation and maintenance to ensure the transformer remains dry.
♦ Fills gas cylinders with dry air.
Product Introduction:
Adopts a multi-stage filtration system. Due to the use of our company's independently developed "strong composite molecular adsorbent", regardless of the moisture content in the air, the dew point of the product gas will quickly drop below -70℃.
Some small water droplets and particles flowing with the compressed air are intercepted by the first-stage filter; the compressed air then enters the chiller, where its temperature drops to 4℃, causing water vapor to reach saturation again and condense into liquid water that settles in the chiller; after passing through precision filters with filtration precision of 0.1µm and 0.01µm, the atmospheric dew point of the compressed air is approximately -22℃; after entering the adsorption tower, water molecules in the air are adsorbed by the strong composite molecular adsorbent, while other air components are discharged from the dry air generator. The air after adsorption has a dew point below -70℃, equivalent to a moisture content of 0.005 grams per cubic meter of air (the saturated moisture content of air at 20℃ is 17.3 grams).
