Product Overview
GD-8008 Electric High-Altitude Wiring Clamp is a specialized tool used for testing and maintenance of high-voltage electrical equipment, suitable for high-altitude wiring operations in scenarios such as overhead lines and substations. This product, through the cooperation of an insulated operating rod and a clamp head, enables ground personnel to clamp and electrically connect conductors at heights, helping to reduce the frequency of climbing operations and improve operational safety.
Technical Parameters
Applicable voltage level: 0.4kV~220kV (depending on insulated rod configuration); Maximum jaw opening size: 80mm; Rated clamping force: ≥500N; Effective insulation length of insulated rod: selected according to voltage level, typically 1.5m~6m; Clamp head material: aluminum alloy, surface treated with anti-corrosion; Operation method: manual screw tightening or spring self-locking; Overall weight: approximately 3.5kg (including standard insulated rod).
Functional Features
The clamp head adopts a double-sided clamping structure, adaptable to conductors of different diameters; The connection point of the insulated rod adopts a threaded or snap-on design, convenient for assembly and disassembly; The inner side of the jaw is provided with anti-slip patterns, helping to maintain stable contact; Some models can be equipped with a universal joint head to adjust the clamping angle. The product has undergone insulation performance testing before leaving the factory, meeting the requirements of relevant electric power safety tools and instruments standards.
Application Scenarios
Suitable for occasions requiring temporary grounding such as power system maintenance, preventive testing, and fault troubleshooting, and can also be used for operations such as high-altitude conductor resistance measurement and phase verification. Commonly used in substations, transmission line towers, distribution lines, and other scenarios, in conjunction with grounding wires, test leads, etc.
Usage Precautions
Before use, check whether the insulated rod is damaged or damp, and whether the clamp head operates flexibly; During operation, maintain sufficient safety distance according to the voltage level, and follow relevant electric power safety work regulations. The product should be stored in a dry and ventilated place, avoiding heavy pressure and contact with corrosive substances.
